FIBRE OPTIC SAFETY CABLES	Technical Data sheet

APPLICATIONS

TECHNOFLAME FOC-2-SLT-HFFR PH120/E30-E60 50/125 OM2 is fire resistant and water-proof fiber optic cable with one central loose tube (up to 6 fibres) intended for use in fire alarm and fire automatic control systems. Cable can be installed in the buildings, tunnels and underground.

Halogen-free cable, applied when higher safety in case of fire is required. The cable is flame retardant, its smoke emission in fire is low and released gases are not corrosive.

Fibreglass yarns armour provides enhanced protection against mechanical damages and rodent attack. It’s also prevent water from reaching the cable core.

The cables are certified by Scientific and Research Development Centre for Fire Protection (Centrum Naukowo-Badawcze Ochrony Przeciwpożarowej) at Józefów.

The cables are resistant to water in accordance with the standard PN-EN 50200 Annex E. TECHNOFLAME FOC-2-SLT-HFFR PH120/E30-E60 50/125 OM2 cables can be used in fire protected rooms with fixed pressure water spraying fire extinguishing systems (sprinkler zones).

The cables are suitable for indoor and outdoor installations.

CONSTRUCTION                                                                                                           

–   coloured multi-mode fibres 50/125 OM2,

–   loose tube (gel filled) (up to 6 fibres in one tube, colours: red, green, blue, yellow, white, gray), diameter 2,5 ± 0,5 mm,

–   double fireproof layer,

–   water swelling glass yarns reinforcement,

–   reinforcement wrapped in a mica tape,

–   red cable outer sheath made of halogen free compound (HFFR) UV stabilized.

CHARACTERISTICS

Attenuation coefficient max   

at   850 nm                                      ≤ 2.3 dB/km;

at 1300 nm                                       ≤ 0.5 dB/km;

Core diameter                                          50 μm

Cladding diameter                                  125 μm

Coating diameter                                  250 μm

Operating temperature range
      after installation                            from   - 30 to + 70°C
      during installation                         from   -   5 to + 50°C

Minimum bending radius
    static    10 x cable diameter
    dynamic    15 x cable diameter

Maximum pulling tension
    after installation    1500 N
    during installation    2000 N

Crush resistance
    continuous    2000 N
    short term    5000 N
Corrosivity of emitted gases per    PN-EN 60754-1/-2, IEC 60754-1/-2
    pH,    >4.3
    conductivity,    <2.5 µS/mm
Smoke density     PN-EN 61034-2, IEC 61034-2
light transmittance, minimum    80%

Cable combustibility                        fire resistant

Combustibility tests                         PN-EN 60332-1-2, IEC 60332-1-2

System circuit integrity acc. to PN-EN 50582 ^*):        

         do 60 min (E30-E60)            DIN 4102-12

         P60-R                                     CSN 73 0895

         PS 60                                     STN 92 0205

         PH120                                    PN-EN 50200 + Annex E

Reference standards                      CNBOP-PIB-KOT-2020/0196-3701 edition 2 and WT-TK-51

Reaction to fire (PN-EN 13501-6): Cca-s1a,d0,a1

*) The maximum change in attenuation of optical fibers according to PN-EN 50582 is 2 dB/m and depends on the cable installation method.

Cable installation – only certified cable fixing systems shall be used. Systems certified according to DIN 4102 part 12 or PN-EN 50200.

Other number of fibres counts available on request.

TECHNOKABEL S.A reserves the right to change specifications without prior notice.