CONTROL CABLES FOR INDUSTRIAL ELECTRONIC APPLICATIONS Technical Data sheet
 

 

 acrobat reader_50x50  

APPLICATIONS

TECHNOKONTROL YKSLY are control cables intended for control and instrumentation circuits, for signal, monitoring and data processing systems and for analogue or digital data transmission, all for industrial electronic applications.

The cables can also be used for power supply to small auxiliary devices on condition that current-carrying capacity limit (see our Technical Guide) is not exceeded.

The cables are suitable for indoor installations connecting fixed and movable equipment.

Cable outer sheath is oil-resistant.

CONSTRUCTION

- flexible, multiwire conductors, stranded of bare annealed copper wires (tin-plated on request), meeting requirements of class 5 per PN-EN 60228,

- PVC insulation - identification colour code in accordance with DIN VDE 47100,

- insulated conductors laid-up in layers,

- cable core wrapped in polyester tape,

- black (RAL 9005) PVC cable sheath, other colours also available.

AVAILABLE UPON REQUEST

TECHNOKONTROL YKSLY-Nr - cables with black conductor insulation and white conductor numbers printed on it for identification, available for cross-section 0.5 mm2 and bigger.

TECHNOKONTROL YKSLY-O - cables designed for frequent contact with petroleum products, as in petrol stations and stores, where engine fuels and lubricants are pumped or handled. The cable sheath is then made of special PVC compound meeting oil resistance requirements of Polish standard PN-EN 60811-404.

TECHNOKONTROL YnKSLY - cables of reduced combustibility, sheathed with special self-extinguishing PVC of high oxygen index and pass combustibility test according to PN-EN 60332-3 standard.

TECHNOKONTROL HKSLH - halogen free cables, applied when higher safety in case of fire is required. The cables are flame retardant, their smoke emission in fire is low and released gases are not corrosive.

TECHNOKONTROL YvKSLY - cables with enhanced PVC sheath, suitable for outdoor installation and direct earth burial.

TECHNOKONTROL IB-YKSLY - specially designed intrinsically safe cable.

 

CHARACTERISTICS

Conductor cross-section

mm2

0.35

0.5

0.75

1

1.5

2.5

Operating voltage, peak value

V

350

500

500

500

500

500

Voltage test

V rms

1200

1500

1500

1500

1500

1500

DC conductor resistance at 20°C, maximum

Ω/km

55.4

39.0

26.0

19.5

13.3

7.98

Capacitance between conductors at 1 kHz, appr.

nF/km

100

100

120

120

130

130

Operating voltage Uo/U

Insulation resistance, minimum

Inductance, approximate

Impedance, approximate

300/300 V

20 MΩ·km

0.7 mH/km

80 Ω

Operating temperature range

      for fixed installation

      for movable installation

Minimum bending radius

Cable combustibility

Combustibility tests

Reference standards

 

from - 30 to + 80°C

from   - 5 to + 70°C

7.5 x cable diameter

flame retardant

PN-EN 60332-1-2, IEC 60332-1-2

WT-TK-14

the cable meets requirements of the low voltage directive 2014/35/EU

Other cross-sections and conductor counts available on request.

TECHNOKABEL S.A. reserves the right to change specifications without prior notice.