XLPE INSULATED AND HALOGEN FREE SHEATHED CONTROL CABLES Technical Data sheet
 

 

 acrobat reader_50x50  

APPLICATIONS

XnKSXSżo-Nr 0,6/1 kV and XnKSXS-Nr 0,6/1 kV control cables are designed for control, protection and monitoring systems in power engineering, also for electric power distribution.

The cables are suitable for industrial applications, such as production plants or air-conditioning systems operating in dry and wet locations, also for outdoor installations, in cable ducts or for direct earth burial.

Halogen free cables shall be applied in locations where, in case of fire, higher safety for human beings and expensive electronic equipment is required. The cables are flame retardant and their smoke emission is low, emitted fumes are non toxic and non corrosive.

CONSTRUCTION                                                                                                           

- bare annealed copper conductors meeting requirements of class 1 per PN-EN 60228 standard,

- black cross-linked polyethylene (XLPE) insulation and white conductor number printed on it; a green-yellow protective conductor in the outer layer in XnKSXSżo-Nr 0,6/1 kV cable,

- insulated conductors laid-up in layers,

- cable core wrapped in polyester tape,

- cable sheath made of halogen free compound (HFFR), black, other colours also available.

AVAILABLE UPON REQUEST

XnKSwXSżo-Nr 0,6/1 kV and XnKSwXS-Nr 0,6/1 kV - cables with inner covering extruded directly on a cable core, recommended for direct earth burial.

Steel wire or steel tape armoured cables as above applied in locations where enhanced protection against mechanical damages is required.

CHARACTERISTICS

Conductor cross-section

mm2

1

1,5

2,5

4

6

10

16

DC conductor resistance at 20°C, maximum

Ω/km

18.1

12.1

7.41

4.61

3.08

1.83

1.15

 

Operating voltage Uo/U

0.6/1 kV

Voltage test

4 kV rms

Insulation resistance, minimum

100 MΩ·km

Corrosivity of emitted gases per

PN-EN 60754-1, PN-EN 60754-2, IEC 60754-2

pH appr.

6,8

conductivity appr.

0,4 µS/mm

Smoke density per

PN-EN 61034-2, IEC 61034-2

minimum light transmittance

70%

Conductor temperature limit

in work conditions

+90°C

in short-circuit

+250°C

Temperature range

during operation

from -30 to +70°C

during installation

from -5 to +50°C

Minimum bending radius

12 x cable diameter

Cable combustibility

flame retardant

Combustibility tests

PN-EN 60332-1-2, IEC 60332-1-2

PN-EN 60332-3-24, IEC 60332-3-24

Reference standards

IEC 60502-1, PN-HD 604 S1, DIN VDE 0266

The cable meets requirements of the low voltage directive 2014/35/EU

Other cross-sections and conductor counts available on request.

TECHNOKABEL S.A. reserves the right to change specifications without prior notice.