DATA TRANSMISSION CABLE Technical Data sheet
 

 

 acrobat reader_50x50  

APPLICATIONS

J-2Y(St)(St)Y 120 Ω are multipair, pair and overall shielded cables intended for control and instrumentation circuits, for signal, monitoring and data processing systems and for analogue or digital data transmission, all in industrial electronics applications.

Cables are designed for transmission in ISDN, PCM, RS 232, RS 422, RS 423, Ethernet 10baseT 10 Mb/s, Token Ring 4/16 Mb/s systems.

Shielded pair structure substantially decreases mutual influence between signals transmitted along the cable.

The cable is protected by an overall electrostatic shield against external electric interferences and prevents emission of interferences produced in the cable.

The cables are suitable for fixed indoor installations.

CONSTRUCTION

- annealed tin-plated copper single wire round conductors of diameter 0.4 mm,

- polyethylene (PE) insulation - identification colour code according to PN-92/T-90321,

- insulated conductors twisted into pairs,

- pair electrostatic shield incorporating a plastic laminated metal foil and an annealed tinned copper single drain wire,

- shielded pairs laid-up into a cable core,

- overall electrostatic shield incorporating a plastic laminated metal foil and an annealed tinned copper single drain wire,

- PVC cable sheath, grey RAL 7001, other colours also available.

AVAILABLE UPON REQUEST

J-2Y(St)(St)H 120 Ω - halogen free cables, applied when higher safety in case of fire is required. The cables are flame retardant, their smoke emission in fire is low and released gases are not corrosive.

CHARACTERISTICS

Characteristic impedance

Mutual capacitance at 1 kHz  

Insulation resistance, minimum

Attenuation loss, [dB/100m] max - at frequency [MHz]:

                1

                4

                10

                16

120 ± 15 Ω

50 ± 5 nF/km

10 GΩ·km

 

3.6

6.0

9.0

11.0

Operating voltage

Voltage test

DC loop resistance at 20°C, maximum

Operating temperature range

                during operation

                during installation

Minimum bending radius

Cable combustibility

Combustibility tests

Reference standards

150 V

1500 V rms

290 Ω/km

 

from  -30 to +70 °C

from    -5 to +50 °C

15 x cable diameter

flame retardant

PN-EN 60332-1-2, IEC 60332-1-2

DIN VDE 815

The cable meets requirements of the low voltage directive 2014/35/EU

Other diameters and pair counts available on request.

TECHNOKABEL S.A. reserves the right to change specifications without prior notice.